Select models and configurations based on Conditions

Select models and configurations generally proceed from the following aspects:
(1) Job Function
Forklift basic job functions are divided into levels of handling, stacking / pick up, loading / unloading, sorting. Can be determined from the initial models described above to be achieved in accordance with corporate job functions. In addition, the special operations capabilities will affect the specific configuration of the truck, such as handling the rolls, hot metal, etc., need Lpg Gas Forklift Truck attachments to complete the installation of special features.
(2) operational requirements
Job requirements include pallet truck or cargo specifications, generally require a high degree of upgrading, operating channel width, climbing, etc., but also need to consider the operating efficiency (the efficiency of different models differ), work habits (such as driving or stop driving habits sit), etc. requirements.
(3) operating environment
If the cargo handling business needs or warehouse environment on environmental noise or exhaust emissions is required, select models and configurations should be considered in. If it is in cold storage or in explosion-proof requirements of the environment, the configuration of the truck should be cold or explosion-proof type. Carefully inspect the truck when jobs need to go through the place, the problem might imagine, for example, out of storage when the door of the truck is a high impact; and out of the elevator, the height and the impact on the truck bearing; when the upstairs work, floor hosts whether the relevant requirements, and so on.
In the selection and determine the configuration, would like a detailed description of the off road rough terrain forklift supplier working conditions, and site surveys to ensure full compliance with the purchase of the truck needs of enterprises. Even if the above steps to complete the analysis, there may be several models while still satisfying the above requirements. At this point, note the following aspects:
① different models, different efficiency, the number of trucks required, the number of different drivers, will lead to a series of changes in costs, as detailed in this article about the performance evaluation section discusses costs.
② If the

High Mast Diesel Forklift

 in the warehouse operations, different models of different channel width required to enhance the ability to have differences, which will bring about changes in the layout of the warehouse, such as cargo storage volume changes.
③ and changes in the number of models, fleet management and other aspects will have an impact.
④ different models in different market holdings, its after-sales support capabilities are different, for example: the low three-stacking forklift driving and driving three high stacking forklift truck series belong to the narrow channel, can be in a very narrow channel (1.5 ~ 2.0 m) complete palletizing, pick up. But the former can not raise the cab, thus less operating vision, low work efficiency. Since the latter can be completely covered by the former function, and the performance is more superior, and therefore beyond the four to five times the sales in the European market, the latter than the former, in China reached more than 6 times. So most vendors have focused development three high stacking forklift driver, while the low three-stacking forklift driver only used in small-tonnage, low lift height (generally less than 6 meters) of the condition. Few sales in the market, the number of its service engineers, engineers experience, parts inventory level of service capabilities will be relatively weak.
After going to a comprehensive assessment of the impact of the above aspects, the selection of the most reasonable option.