The fire fighting when the diesel truck is on

In case the forklift fire, should try to forklift open to a safe open office, will be the engine extinguishes, pull off the main switch of the power supply, close the blinds, 6 tons diesel forklifts using ABC dry powder fire extinguishing machine or 1211 fire extinguisher to put out the fire. You can also use the sand, soaking sacks clothes were covered with fire. Forklift maintenance emphasizes first to ensure the safety of the individual.

Promptly eliminate fuel leakage, wire (including charging wire) of broken skin, and electrical aging is not firmly fixed by extrusion, friction problem. Increase the size of the fuse or replace the fuse with other metal wire, 10 tons diesel forklifts and not use the method of short circuit to draw fire test line or check the battery voltage.

Attention to fire, diesel forklift fire prevention measures

1. forklift fire main reason is forklift fuel (diesel, lubricating oil, rubber products, etc.) in air encountered fire, such as welding, gas cutting, smoking,  10 tons diesel forklifts ,wire aging grounding line and poor contact of electric spark etc.) arising from the burning.
2.  forklift ignition prevention

1) the engine will be stalled and the smoke is forbidden when filling in the fuel.

2) no use of fire lighting, such as matches, lighters, etc., when the forklift is overhaul;

3) of forklift for welding, 3 tons diesel forklifts , gas cutting operation, depending on the specific situation to remove or protect the fuel, and the welding and next to the oil clean, next to should be equipped with the necessary fire extinguishers.

Tonnage allocation of diesel off-road forklift truck

Mainly, 1.5T, 1.8T, 2T, 2.5T, 3T, diesel forklift trucks choose the kind of purchasing configuration need to look at the weight of the goods, with the highest level of fork. Because with the height increase, the highest weight decreases forklift safety. Such as 5 meters of 2T forklift truck, low operation can fork up to 2T, but the fork to nearly 5 meters in height, then it safe weight may only 800kg, 7 tons diesel forklifts or up to 1000kg the. Over this weight may be dangerous due to overload. This is important for understanding and understanding.

Improvement of T4 standard for a new generation of models of diesel forklift trucks

JCB uses standard Ecomax engine lubricating oil, without expensive oil CJ4. The service interval of 500 hours, diesel forklift trucks ,in addition, the replacement of the crankcase ventilation filter device for a period of 1500 hours.

Can install 4 speed synchronous shuttle transmission, to ensure the long service life and ease of use. A new generation of models are still hydraulic flow improvements have been made, now 76L/m, 7 tons diesel forklifts , ensure rapid lifting and cycle time reduction, so as to improve the efficiency, reduce the fuel consumption.

926930940 and 950 of the weight lifting cover 2.6 tons to 4.5 tons, lifting height covered 3.6 meters -6.7 meters. All models are using the latest JCB brand logo, high-end eye-catching. The equipment can also be optional awning, or full glass cab, also optional air conditioning, diesel forklifts , the operating environment is more comfortable.

Efficient power system of diesel forklift tuck

The combustion design JCB Ecomax engine, which can not only reduce emissions, but also can improve fuel efficiency, 2 tons diesel forklift truck reduce operating costs. The use of high pressure fuel injection, variable turbocharger and exhaust gas recirculation cooling device, the JCB Ecomax engine is fully compliant with the latest T4 emission regulations, diesel forklift truck there is no need to install a high cost DPF or complex processing system.

Counterbalanced diesel forklift research

Into April, Hanshan praise Zen Mountain Park is a booming economic scene,diesel forklift trucks with a total investment of 180 million yuan of Huang Chia truck project is on lease to the 32,000 square meters standardized plant renovation, battery operated forklifts , internal combustion forklifts and other four water part of the production line equipment has been admitted.

With the development, production and sales of diesel counterbalanced trucks, counterbalanced gasoline, liquefied petroleum gas, natural gas trucks,3 tons diesel forklift ， off-road trucks and other outdoor products started, Hanshan will end not only the production of auto parts production history of the vehicle.

Reach truck with the launch of the appliance industry

With the rise of appliance industry ,reach trucks hopes for the new.

Reach Truck Product Features,diesel forklift trucks

1. forward function, adjustable forks and easily for a variety of trays, small channels.
2. Vertical AC drive, low noise, high transmission efficiency, installation and convenient maintenance.
3. Import Control System, responsive, strong acceleration and deceleration control.
4. electromagnetic braking and regenerative braking combined braking to keep the vehicle more reliable.
5. reliable multi-way valve control system, each action can be arbitrary.
6. A variety of door frame, models available.
7. The standard folding pedals, electronic steering mode, more comfortable, more convenient.off road forklifts
8. Non-standard designs, according to customer requirements,tailor.

Diesel forklift trucks operation

This specification is to be more safe and correct use of diesel forklift, ensure the safety of the transport of goods,rough terrain forklift manufacturers ， to prevent the occurrence of accidents.

• The implementation period

Operator， must specify trained personnel,3.5 tons diesel forklift truck and a qualified driving license of forklift, responsible for the safe use of diesel forklift truck

• The review period

Manager， responsible for the supervision and guidance of the scenic spot of forklift safety

• The maintenance period

First maintenance of truck （battery operated forklifts ） is responsible for forklift driver
Second maintenance and repair of truck  is responsible for the public works department

The rise of Chinese forklift spare parts market

In recent years, along with the other logistics and electronic commerce, Chinese logistics and warehousing industry has been rapid development,four wheel rough terrain forklift , city and mechanization progress and further stimulate the forklift market prosperity. The main enterprises in 2013 China forklift industry total truck sales of 301200 units, an increase of 11.07%.

  As a world factory, China also deserved to become the world's leading forklift truck and forklift accessories ( forklift spare parts ) production and sales market.

Like a raging fire China forklift After Market economy and economy development. It has been the first international rob fat.( rough terrain forklift for sale ) Forklift accessories is the major manufacturers of TARGET. Spare parts business because of the growing market demand and high profits become the manufacturers seek new profit growth point.

Summer forklift care focus

                                                        Summer forklift care focus

 

  Hot temperatures make people too much, energy can not be fully involved, forklift 2.5 tons rough terrain forklift is the same, the summer is more important for the maintenance of forklifts, forklift Tianjin Here we see how the company is to maintain, promote improve its efficiency: we are know, at the time of purchase have a forklift truck safety rules, the general reference to the safe operation of forklifts manuals, in addition to go through professional training to their posts. Try to slow down in the course of the speed of mechanical parts damage.

   First, to protect the quality of the quality of the mechanical parts of facilities, to prevent all kinds of debris into the mechanical operation of the site, in order to protect forklift parts clean. In the event of failure, try to go to a regular professional maintenance repair shop. Besides, now that the summer temperatures rise, high-temperature mechanical operation is easy to bring failure. Construction machinery in use should pay attention to clean parts, reduce dust and ensure smooth mechanical ventilation. Identify problems immediately stop using and even troubleshooting, should not lose because of the small and large. Again, the forklift to reduce the impact on the mechanical, chemical corrosion in the job, the focus is to prevent rain and airborne chemical composition on mechanical intrusion. Staff can take appropriate measures depending on the circumstances.

Finally, remind forklift 2.5 tons rough terrain forklift trucks work friends, and now the hot summer, summer heat, we must do the work of heatstroke hot weather when work so our people and machinery inflicting double damage.

When you purchase a large truck 3 Notes

                                   When you purchase a large truck 3 Notes

 

Currently on the market to choose from truck brands, models of complex, model selection, vendor selection is a lot to buy companies often face. Hangzhou Forklift below from three aspects you focus on details about:

First, the performance criteria

When integrated assessment, many companies due to the expertise and technology forklifts do not understand the quality of products often can not make a reasonable judgment. In general, the quality of the forklift and its superior performance is often reflected in the high efficiency, low cost, high reliability, good ergonomic design, and convenient services, and many other aspects.

1, easy maintenance

To consider whether the truck easy to maintain. All parts should be easy to replace, fault diagnosis and troubleshooting faster. High quality forklift control systems have a modular, can be directly coupled with a laptop, use diagnostic procedures to quickly find faults or modify parameter settings.

Business before buying the truck, in addition to understanding forklift price and tonnage, but should be combined with the specific conditions and business development planning, procurement decisions after considering the strength of the truck manufacturers, reputation, service assurance and other factors. The strength of the forklift supplier in addition to providing reliable service, its sales staff should have the expertise, manual forklifts, can help customers complete model and configuration options stage.

2, Ergonomics

Ergonomics is a widely used in product design is to improve the operating environment, especially science, purpose is to reduce driver fatigue and increase operator comfort and other means, to maximize production efficiency.

3 Low Cost

(1) maintenance costs, maintenance costs, not only the actual cost of repair parts, but also to time-dependent failure rates or failure. Therefore, a high-quality truck, due to its low failure rate, its maintenance costs are lower.

(2) labor costs, labor costs with the number of drivers and their total monthly wages in different variations, the number of drivers will be due to the use of high efficiency and reduce forklift.

(3) energy costs, energy costs will vary with different power systems and forklifts different, such as electricity, diesel, liquefied petroleum gas or gasoline.

(4) maintenance costs, maintenance costs, not only the actual cost of repair parts, but also to time-dependent failure rates or failure. Therefore, a high-quality truck, due to its low failure rate, its maintenance costs are lower. 
8 tons diesel forklift trucks

Forklift use and maintenance can prolong the service life

                  1.5 tons rough terrain forklift truck use and maintenance can prolong the service life

         In real life, people's work is very complex, after the product it must be working on handling, storage and sales process, this process requires a lot of equipment to complete the work in, you can carry it, a companies will produce a lot of products to, if using manual handling the case, continue to spend a lot of manpower,, while its efficiency is very low, but also requires a lot of money for the development of enterprises is not any good, so people in order to to solve this problem, using forklifts to carry on items, thus saving a lot of hungry human and financial resources, and it is also the efficiency has been greatly improved, but the use of the truck when it's maintenance work is very important, it's maintenance is a direct impact on the life of its use, it should be maintained in the following manner.

          First, the truck belongs to mobile equipment, you want to make it last longer, and it must maintain its various components, such as its engine is a direct impact on the performance of the forklift, so before use, it must be to develop the habit of heat engine, long kept this habit, in the course of the forklift can be used to play a stabilizing effect. In addition, its various components for inspection and maintenance is very important, so its various components should be checked regularly, there is a problem we must deal with in a timely manner, at the time the truck is not used, it must first table after cleaning and then stored.

         These are on the truck in the course of maintenance methods described, we hope to be able to play some help in the future use. 7 tons diesel forklift

Be careful when using a forklift which

                                  Be careful when using a forklift which

 

 
Forklift is a technical machine tools, this car is generally present in large supermarkets or if there is a stream object, docks, warehouses inside, it played a role in moving. For example, this place will be a heavier more products move to another place, convenient and fast. Currently, more than the industry's most popular truck is already the most commonly used as a transportation tool. Then use the time to pay attention to what is the problem?

The first is for the staff to use forklift parts, it is to have professional skills certificate. Although this car is just a removal tool, but its technical point, but very much, did not experience the professional training of operating personnel when operating this car, although it can carry cargo, but the speed and proficiency will reduce the number, but there is no normal skill book, is not allowed such as Hangzhou forklift.

The second is to take note of the weight carried. There are great little car, carrying the weight is not the same. Under normal circumstances, this car can carry the weight of the need to carry, if more than the car itself carries weight, the car in a short time will not cause any effect, other than the long-term will reduce the life of the car. So pay attention to what the different truck carrying the weight of its different and must be strictly adhered to.

Finally, pay attention to what  1.5 ton battery forklift above board. Who used this car knows that the car must be placed on top of a board, the board can only be put on top of the cargo. In using this car, be sure to keep the board balanced, otherwise the power of this truck will directly damage the swap board, causing the board can not be used.

Forklift maintenance

                                                        Forklift maintenance
 

   The truck, in most cases is used for supporting the set of pallets of goods handling, stacking, and the like with the short distance transportation tray. The most commonly used industrial ports, railway stations, airports, garages, factories working workshops, warehouses, logistics centers, distribution centers, especially in some ports are more common transport equipment, because the market is relatively Tianjin forklift active, it's effective in Tianjin as China's major import and export port. At the same time the truck can also enter to perform work within the cabin, container and cars, then for the use of such a broad range of tools, and its maintenance need to pay attention to what the problem yet.

   Forklift forklift spare parts maintenance and repair and maintenance is divided into primary and secondary care, in their daily work as well as when the machine can do the job at the level of maintenance:

1, check some work in the use of parts is normal, for example, whether the thermostat is working properly, whether the transmission shift work, how the fan belt tightness. Its import diesel packing machine oil filter if there is a blockage because of stains caused because timely replacement and the timing of cleaning the filter.

2, the valve clearance check and adjustment, as well as the gap hand, foot brake in between the brake pads and brake drum, and to adjust it to a reasonable range allowed. Part of the engine and start the engine if it is safe and timely clean light oil filter, fuel filter chips.

3, due to maintenance and dismantled parts, after reinstalling the way to conduct a test. Road test after a period of time to check brakes, transmissions, gear pumps for proper heating.

Manual forklift important position in transport links

                             Manual forklift important position in transport links

 

   For now, continue to promote the continuous development of life science and technology and application of continuous innovation, and fully automated demand for a variety of scientific and pragmatic factors on the flow into our lives. In recent years, such as the development of the logistics market, the booming phenomenon also stimulated the development of the forklift industry. Therefore, each forklift company produced a different series, different varieties of trucks, to meet different users, different work environments and work objects of different populations. In the logistics industry, the most important transport links, only improve the efficiency of this session, we can effectively improve the efficiency of the whole process. In the development of modern industry, in order to be able to take more advantage of Tianjin forklift rental company launched a rental model. Manual forklift have a modern, simple structure, high efficiency, energy saving and environmental protection is a green product. Manual forklift visible position in the transport links are very important.

Want effective use of manual 1.5 tons rough terrain forklift truck, you need to know how to use a manual forklift, it is a simple mechanical device, although the structure is simple, but there are certain works. To avoid operating on the food, you must master the correct method, read the instructions carefully. Especially within the enterprise, you need to arrange for someone training to improve safety and efficiency.

In addition, we should also pay special attention to the environment and operating space, manual double forks forklift bumpy ground transportation of goods, efficiency will obviously be greatly reduced, and therefore, we must ensure that the ground level. Also note that to avoid space debris piled up at work, otherwise it will cause an accident.

How better to clean the dust forklift pallet

                               How better to clean the dust 7 tons diesel forklifts pallet

 

     1.5 tons off road forklift pallet operations in their daily work, the use of more frequent, and more for the logistics flow, working capital goods production workshop with, so it is easy to dirty the whole, so that the user to clean the dust tray is also very critical aspect the following will give you a recommendation on how to clean up dust forklift pallet:

       Because plastic products are used for the carrier pallets of goods, it is generally placed in the bottom, use a long time, it will inevitably become dirty, and sometimes if you want to use it to place a clean cloth, material, you need plastic tray cleaning, this time what the attention?


Cleaning is a certain rule, incorrect cleaning, not only from cleaning purposes, and may cause damage to the plastic tray, the best way is to place the plastic tray into the open, then align the plastic tray with water pipe , just use water to rinse the first pass will be able to re-appropriate. Because ordinary plastic tray If you simply used to store goods, there will not be difficult to clean stains, but many are long accumulation of dust, rinse with water can be cleaned.


If the plastic tray surface is more difficult to wash the stains exist, you can choose to use a professional after soaking diluted sodium hydroxide, and then scrub with a wet rag, so cleaning up is much more convenient. Under normal circumstances it is not recommended to use stainless steel cleaning ball scrub, because the wire is relatively hard, scrub the surface of the plastic tray will cause scratches.


Plastic tray surface grid holes have a lot, so it may be more difficult to clean, the best way is with a soft hair brush scrub, coupled with some detergent and warm water, cleaning up more convenient.

Types of forklifts

 Types of forklifts

Types of chinese forklift more, there are some special forklift. Basically, the more places for the logistics and warehousing, factories and individuals to produce their own use (and now most of the plant are used, such as the food industry, paper industry, machining industry, equipment manufacturing, parts manufacturers), port (container use). Currently forklift is a high efficiency at low cost instead of doing production tools, a wide range of applications, and in the process of economic development in the future will be more with more.

Forklift usually be divided into three categories: internal combustion forklifts, electric forklifts and warehouse trucks.

Forklift usually be divided into three categories: internal combustion forklifts, electric forklifts and warehouse trucks.

 
(1) internal combustion 8 tons diesel forklift internal combustion forklifts are divided into ordinary internal combustion forklifts, heavy trucks, container trucks and sides of the truck. ① ordinary internal combustion forklifts generally use diesel, gasoline, liquefied petroleum gas or natural gas engine as power, load capacity of 1.2 to 8.0 tons, the operating channel width is generally 3.5 to 5.0 m, taking into account the emissions and noise problems, usually outdoors, shop or other exhaust emissions and noise do not require special places. Due to convenient refueling, it can achieve long continuous operation, and competent (such as rain) to work in harsh environments. ② heavy truck diesel engine as power, load capacity of 10.0 to 52.0 tons, generally used for heavier cargo terminals, steel and other industries outdoor jobs. ③ container diesel forklift trucks diesel engine as power, load capacity from 8.0 to 45.0 tons, is generally divided into empty forklift, heavy container forklift and reachstacker. Applied to container handling, such as container yard or port terminal operations.
(2) electric forklift trucks carrying eight tons of electric power to the motors, batteries for energy. Carrying capacity of 1.0 to 8.0 tons, the operating channel width is generally 3.5 to 5.0 m. Since there is no pollution, low noise, it is widely used in indoor operations and other demanding environmental conditions, such as medicine, food and other industries. With the people's attention to environmental protection, electric forklift is gradually replacing the internal combustion forklifts. Because each battery for about 8 hours in general needs to be charged, so for multi-shift working condition with battery backup.
(3) storage warehouse forklift trucks primarily for cargo handling and warehouse forklift design. Apart from a few warehouse forklift (such as manual pallet truck) is the use of human-driven, others are driven by an electric motor, because the body is compact, mobile and flexible, light weight and good environmental performance and have been widely used in the storage industry. When multi-shift operation, the motor-driven warehouse forklift battery backup needed.
(4) electric tractor electric tractor (trailer) tractor using a motor-driven, with its towing capacity (3.0 to 25 tons), followed by pulling a few car loading cargo. Often used for transportation between the workshop or workshops bulk goods, such as automobile manufacturing warehouse to the assembly line of transportation, airport baggage.