Internal combustion High Mast Diesel Forklift run-in period of work is

characterized by: Parts machined surface is rough, poor lubrication, increased wear, easy to loose fasteners, provisions must be run-in period for maintenance and use in accordance with the internal combustion forklifts.
Run-in period of internal combustion forklifts: Start with 50-hour break-in period. High Mast Diesel Forklift Run-in period, three tons of internal combustion forklifts from the weight must not exceed 600kg, lifting height is generally not higher than 2m. Speed ??of the engine shall be high speed, speed limiting device shall be adjusted or removed, the speed should be maintained at 12km / h or less. In accordance with the proper use of fuel and lubricants. The right to correct start driving and operating the engine warm-up to more than 40 degrees in order to start; started to have a smooth, until the temperature to normal after an upshift; suitable shift, avoid crashing; choose a good road; try to avoid the emergency brake; Use close attention to the process of transmission, drive axle, wheel wheelchair, brake drum temperature; when loading and unloading operations, strictly abide by the rules.