Select models and configurations based on Conditions

Select models and configurations generally proceed from the following aspects:
(1) Job Function
Forklift basic job functions are divided into levels of handling, stacking / pick up, loading / unloading, sorting. Can be determined from the initial models described above to be achieved in accordance with corporate job functions. In addition, the special operations capabilities will affect the specific configuration of the truck, such as handling the rolls, hot metal, etc., need Lpg Gas Forklift Truck attachments to complete the installation of special features.
(2) operational requirements
Job requirements include pallet truck or cargo specifications, generally require a high degree of upgrading, operating channel width, climbing, etc., but also need to consider the operating efficiency (the efficiency of different models differ), work habits (such as driving or stop driving habits sit), etc. requirements.
(3) operating environment
If the cargo handling business needs or warehouse environment on environmental noise or exhaust emissions is required, select models and configurations should be considered in. If it is in cold storage or in explosion-proof requirements of the environment, the configuration of the truck should be cold or explosion-proof type. Carefully inspect the truck when jobs need to go through the place, the problem might imagine, for example, out of storage when the door of the truck is a high impact; and out of the elevator, the height and the impact on the truck bearing; when the upstairs work, floor hosts whether the relevant requirements, and so on.
In the selection and determine the configuration, would like a detailed description of the off road rough terrain forklift supplier working conditions, and site surveys to ensure full compliance with the purchase of the truck needs of enterprises. Even if the above steps to complete the analysis, there may be several models while still satisfying the above requirements. At this point, note the following aspects:
① different models, different efficiency, the number of trucks required, the number of different drivers, will lead to a series of changes in costs, as detailed in this article about the performance evaluation section discusses costs.
② If the

High Mast Diesel Forklift

 in the warehouse operations, different models of different channel width required to enhance the ability to have differences, which will bring about changes in the layout of the warehouse, such as cargo storage volume changes.
③ and changes in the number of models, fleet management and other aspects will have an impact.
④ different models in different market holdings, its after-sales support capabilities are different, for example: the low three-stacking forklift driving and driving three high stacking forklift truck series belong to the narrow channel, can be in a very narrow channel (1.5 ~ 2.0 m) complete palletizing, pick up. But the former can not raise the cab, thus less operating vision, low work efficiency. Since the latter can be completely covered by the former function, and the performance is more superior, and therefore beyond the four to five times the sales in the European market, the latter than the former, in China reached more than 6 times. So most vendors have focused development three high stacking forklift driver, while the low three-stacking forklift driver only used in small-tonnage, low lift height (generally less than 6 meters) of the condition. Few sales in the market, the number of its service engineers, engineers experience, parts inventory level of service capabilities will be relatively weak.
After going to a comprehensive assessment of the impact of the above aspects, the selection of the most reasonable option.

Braking system common faults and approach

The first two rounds of the brake can not analyze the reasons for failure are:
1, the gap between the two brake lines or brake ranging blockage, the gap between the two brake adjustment or dredge pipeline;
2, there is oil in the brake drum or brake shoes distorted, approach is to remove oil or repair, replacement brake shoes;
3, there is air in the brake lines, is the way to deal with exclusion of air brake lines.

Second, the hand brake failure, this may be due to the hand brake cable slack approach to treatment is to adjust the hand brake wire tightness.

Third, Zhidongshiling, analysis of failure are:
1, the diesel engine partsbrake drum and brake shoe gap is too large, is the way to deal with the gap modulation of the brake drum and brake shoes;
2, the brake master cylinder fluid out of the valve failure, maintenance approach is out of the valve;
3, excessive brake lining wear, friction plate approach is better;
4, the contact surface is not enough friction plate, friction plate approach is repaired.


Steering system common faults and approach:

First, the steering gear oil spills, analyze the reasons for failure are:
1, each steering joints (body, every dish, stator, rotor) oil spill, this treatment approach is to replace the seals, cleaning steering, sturdy bolt joints or better;
2, the journal of the relief valve seals or damaged, this approach is relatively simple, the journal is a better place and seals at the relief valve;
3. Limit bolt washers at uneven way this situation was handled better polished washer or gasket.

Second, steering failure, analyze the reasons for failure are:
1 piece of battery powered forklift broken steering spring break or deform steering pin, it may be broken or deformed coupling opening, this approach is better spring, pin, coupling;
2, valve failure, the approach is to clean safety valve, replace the spring;
3, steering cylinder leakage is too large, the approach is to replace the seals or cylinder.

Domestic brands in the Wheel Driving Diesel Forklift technically giants in mature

Quality and price in a reasonable range. Plus extensive distribution network, with the advantages of foreign brands do not have. And because exports frustrated, exports dropped significantly, many domestic brands began to pay more attention to the domestic market, efforts to develop the domestic market, but also created its glory in the domestic market. Future development may affect the forklift truck market constraints,

rough terrain fork lifts

still out of the intensity and the way the government macro-control. Government in recent years has been committed to developing high-tech industry and the tertiary industry services,

rough terrain forklift for sale

 the overall direction should be no change, but the current revitalization of the economy for the short-term requirements, and has slowed. China's economy there are still many uncertainties, but also has many problems, the economic crisis is not completely over. How short-term growth from investment-led, demand-pull into a long-term growth; how to control the size of credit; unhealthy economic structure adjustment, these same places also restricts the development direction and speed forklift industry. Can be said that China's total demand in the past two years the forklift will have relatively high growth, mainly driven by the power comes from the Wheel Driving Diesel Forklift, which is China's global manufacturing plants by the position will not change in the short term due to . Then growth will be eased, and the structure of market demand will gradually change, this change is mainly due to changes in China's industrial structure, light electric warehouse forklift third category will be the second recent growth, with further increasing the cost of land, as well as control of warehouse space, including increased labor costs, the second truck will start to grow rapidly.